Monitoring and Control System for Electrical Energy Consumption Based on The Internet of Things

Authors

  • Andi Syofian Institut Teknologi Padang
  • Yugerita Firmance Institut Teknologi Padang,
  • Yultrisna Yultrisna Politeknik Negeri Padang

DOI:

https://doi.org/10.30630/jeccom.1.2.59-66.2023

Keywords:

App Inventor NodeMCU ESP8266 PZEM – 004T Thingspeak Smart control

Abstract

Electrical energy consumption in the household sector is frequently uncontrolled, particularly when electronic devices are used. That is the tendency of users to forget to turn off or unplug the electronic device from the socket. In that case, modifications are made to the socket so that it can be controlled remotely via a smartphone. The hardware design uses the NodeMCU ESP8266 as a microcontroller combined with the PZEM-004T sensor module for electrical magnitude. Relay modules are used to secure the circuit in cases of higher loads. So that in the system, all three sockets can be monitored simultaneously. While the software design uses MIT App Inventor and Thingspeak Platform as servers. The data is saved in CSV format, which can be converted to Google Sheets or Microsoft Excel. Data is stored in the form of the name of the electronic equipment, the time of use, as well as voltage, current, power, cos phi, and electrical energy used. So that users can regulate the use of electrical equipment at home and reduce the waste of electrical energy. The test results showed the average faults for voltage, current, power, cos phi, and energy were 0.06%, 5.32%, 5.67%, 0.7%, and 7%, respectively.

References

PT PLN, “Statistik PLN 2021,” Stat. PLN 2021, vol. 01001–2206, no. Juni, pp. 49–58, 2021.

A. W. O. Muhammed et al., “Design and Implementation of an IoT Based Home Energy Monitoring System,” Proc. 5th Int. Conf. Inf. Technol. Educ. Dev. Chang. Narrat. Through Build. a Secur. Soc. with Disruptive Technol. ITED 2022, no. November, 2022, doi: 10.1109/ITED56637.2022.10051192.

M. Prathik, K. Anitha, and V. Anitha, “Smart energy meter surveillance using IoT,” Proc. Int. Conf. Power, Energy, Control Transm. Syst. ICPECTS 2018, pp. 186–189, 2018, doi: 10.1109/ICPECTS.2018.8521650.

K. ELORBANY, C. BAYILMIŞ, and S. BALTA, “A Smart Socket Equipped With IoT Technologies for Energy Management of Electrical Appliances,” Sak. Univ. J. Comput. Inf. Sci., vol. 4, no. 3, pp. 347–353, 2021, doi: 10.35377/saucis...863272.

N. Nuryawan and M. Jannah, “Electrical Energy Monitoring and Control System In Boarding Rooms Based On The Internet of Things,” Int. J. Eng. Sci. Inf. Technol., vol. 2, no. 4, pp. 76–83, 2022, doi: 10.52088/ijesty.v2i4.335.

M. H. Yaghmaee and H. Hejazi, “Design and Implementation of an Internet of Things Based Smart Energy Metering,” 2018 6th IEEE Int. Conf. Smart Energy Grid Eng. SEGE 2018, pp. 191–194, 2018, doi: 10.1109/SEGE.2018.8499458.

A. Pandoh, A. S. Wasekar, S. Sarkar, and A. B. Thakur, “Smart Electricity Meter Monitoring and Prediction using iSocket,” 2021 7th Int. Conf. Adv. Comput. Commun. Syst. ICACCS 2021, pp. 211–216, 2021, doi: 10.1109/ICACCS51430.2021.9442011.

A. W. Atmoko et al., “ELECTRIC VAMPIRE REMOVER BERBASIS IOT UNTUK MENGATASI VAMPIR LISTRIK PADA,” vol. 1, no. 2, pp. 115–124, 2021.

E. Sorongan, R. Kango, and S. Suhaedi, “The Application of Energy Management Systems Using the Internet of Things to Improve the Efficiency of Electrical Energy Usage in the MSMEs Sector,” PROtek J. Ilm. Tek. Elektro, vol. 10, no. 1, p. 26, 2023, doi: 10.33387/protk.v10i1.5042.

Muliadi, M. Y. Fahrezi, I. S. Areni, E. Palantei, and A. Achmad, “A Smart Home Energy Consumption Monitoring System Integrated with Internet Connection,” 2020 IEEE Int. Conf. Commun. Networks Satell. Comnetsat 2020 - Proc., vol. 5, pp. 75–80, 2020, doi: 10.1109/Comnetsat50391.2020.9328960.

R. S. Hariharan, R. Agarwal, M. Kandamuru, and H. Abdul Gaffar, “Energy consumption monitoring in smart home system,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1085, no. 1, p. 012026, 2021, doi: 10.1088/1757-899x/1085/1/012026.

I. Bagus, G. Purwania, I. N. S. Kumara, and M. Sudarma, “Application of IoT-Based System for Monitoring Energy Consumption,” Int. J. Eng. Emerg. Technol., vol. 5, no. 2, pp. 81–93, 2020, [Online]. Available: https://ojs.unud.ac.id/index.php/ijeet/article/view/60487.

K. Luechaphonthara and A. Vijayalakshmi, “IoT based application for monitoring electricity power consumption in home appliances,” Int. J. Electr. Comput. Eng., vol. 9, no. 6, pp. 4988–4992, 2019, doi: 10.11591/ijece.v9i6.pp4988-4992.

Downloads

Published

2023-12-30

How to Cite

Syofian, A., Firmance, Y. ., & Yultrisna, Y. (2023). Monitoring and Control System for Electrical Energy Consumption Based on The Internet of Things. JECCOM: International Journal of Electronics Engineering and Applied Science, 1(2), 59–66. https://doi.org/10.30630/jeccom.1.2.59-66.2023

Issue

Section

Articles